Corrosion resistance of titanium dioxide anodic coatings on Ti-6Al-4V

The Ti-6Al-4V alloy is used for biomedical implants due to its corrosion resistance and biocompatibility, associated with the spontaneous formation of TiO2 oxide. However, the native film may be flawed and after some time of implantation in the body it may release metal ions. Oxides of higher thickn...

Descripción completa

Detalles Bibliográficos
Autor principal: Vera, M.L
Otros Autores: Linardi, E., Lanzani, L., Mendez, C., Schvezov, C.E, Ares, Alicia Esther
Formato: Capítulo de libro
Lenguaje:Inglés
Publicado: Wiley-VCH Verlag 2015
Materias:
Acceso en línea:Registro en Scopus
DOI
Handle
Registro en la Biblioteca Digital
Aporte de:Registro referencial: Solicitar el recurso aquí
Descripción
Sumario:The Ti-6Al-4V alloy is used for biomedical implants due to its corrosion resistance and biocompatibility, associated with the spontaneous formation of TiO2 oxide. However, the native film may be flawed and after some time of implantation in the body it may release metal ions. Oxides of higher thickness than naturally grown can be produced by anodic oxidation. The objective of this study was to evaluate the corrosion resistance of anodic TiO2 coatings, evaluating the influence of the thickness and crystalline structure of the coatings. Amorphous coatings were obtained from 27 to 140 nm that crystallized in anatase and rutile phases by heat treatment. The corrosion resistance was evaluated by potentiodynamic measurements in 0.9% sodium chloride, which is the main component of physiological solution. Evaluation of the electrochemical parameters showed that anodic coatings are more efficient barrier than the natural TiO2 oxide. As the oxidation processes influenced the electrochemical properties of metals by altering the resistance to corrosion, therefore they become important to study the electrochemical behavior of the oxides by electrochemical impedance spectroscopy. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Bibliografía:Amerio, O.N., Rosenberger, M.R., Favilla, P.C., Alterach, M.A., Schvezov, C.E., (2006) Rev. Arg. Cir. Card., 4, p. 70
Huang, N., Yang, P., Leng, Y.X., Chen, J.Y., Sun, H., Wang, J., Wang, G.J., Leng, Y., (2003) Biomater., 24, p. 2177
Leng, Y.X., Huang, N., Yang, P., Chen, J.Y., Sun, H., Wang, J., Wan, G.J., Chu, P.K., (2002) Surf. Coat. Tech., 156, p. 295
Long, M., Rack, H.J., (1998) Biomater., 19, p. 1621
Aladjem, A., (1973) J. Mater. Sci., 8, p. 688
Vera, M.L., Ares, A.E., Lamas, D., Schvezov, C.E., (2008) Anales AFA, 20, p. 178
Vera, M.L., Ares, A.E., Rosenberger, M.R., Lamas, D.G., Schvezov, C.E., (2009) Anales AFA, 21, p. 174
Velten, D., Biehl, V., Aubertin, F., Valeske, B., Possart, W., Breme, J., (2002) J. Biomed. Mater. Res., 59, p. 18
Diamanti, M.V., Pedeferri, M.P., (2007) Corros. Sci., 49, p. 939
Schvezov, C.E., Alterach, M.A., Vera, M.L., Rosenberger, M.R., Ares, A.E., (2010) JOM, 62, p. 84
Vera, M.L., Rosenberger, M.R., Lamas, D.G., Schvezov, C.E., Ares, A.E., (2010), p. T2. , Actas IBEROMET XII y X CONAMET/SAM. - 143; Leyens, C., Peters, M., (2004) Titanium and Titanium Alloys, , Wiley-VCH, Weinheim
Schaldach, M., (1993) Electroterapia Del Corazõn, Aspectos Técnicos en Estimulaciõn Cardiaca, , Color Press, Walla Walla, WA
Liu, X., Chu, P.K., Ding, C., (2004) Mater. Sci. Eng. R, 47, p. 49
Souza, M.E.P., Lima, L., Lima, C.R.P., Zavaglia, C.A.C., Freire, C.M.A., (2009) J. Mater. Sci. Mater. Med., 20, p. 549
Galvele, J.R., Duffõ, G.S., (2006) Desgradaciõn de Materiales - Corrosiõn, , Jorge Bauino Ediciones: Instituto Sabato, Buenos Aires
Ion, R., Vasilescu, C., Drob, P., Vasilescu, E., Cimpean, A., Drob, S.I., Gordin, D.M., Gloriant, T., (2014) Mater. Corros., 65, p. 593
Vera, M.L., (2013), Ph.D. Thesis, Universidad Nacional de General San Martín, Comisiõn Nacional de Energía Atõmica, Instituto de Tecnología "Prof. Jorge A. Sabato", Buenos Aires; Vera, M.L., Alterach, M.A., Rosenberger, M.R., Lamas, D.G., Schvezov, C.E., Ares, A.E., (2014) Nanomater. Nanotechnol., 4, p. 1
Oliveira, N.T.C., Biaggio, S.R., Piazza, S., Sunseri, C., Di Cuarto, F., (2004) Electrochim. Acta, 49, p. 4563
Vetter, K.J., (1967) Electrochemcial Kinetics: Theoretical and Experimental Aspects, , Academic Press, New York
Pourbaix, M., (1974) Atlas of Electrochemical Equilibria in Aquous Solutios, , NACE Cebelcor, Houston
Metikos-Hukovic, M., Kwokal, A., Piljac, J., (2003) Biomater., 24, p. 3765
Marino, C.E.B., Biaggio, S.R., Rocha-Filho, R.C., Bocchi, N., (2006) Electrochim. Acta, 51, p. 6580
Tamilselvi, S., Raman, V., Rajendran, N., (2006) Electrochim. Acta, 52, p. 839
Diamanti, M.V., Bolzoni, F., Ormellese, M., Pérez-Rosales, E.A., Pedeferri, M.P., (2010) Corros. Eng. Sci. Tech., 45, p. 428
Cigada, A., Cabrini, M., Pedeferri, P., (1992) J. Mater. Sci.: Mater. Med., 3, p. 408
Bidhendi, H.R.A., Pouranvari, M., (2011) Metalurgija-MJoM, 17, p. 13
Shi, P., Cheng, F.T., Man, H.C., (2007) Mater. Lett., 61, p. 2385
Fadl-Allah, S.A., Mohsen, Q., (2010) Appl. Surf. Sci., 256, p. 5849
Chiu, K.Y., Wong, M.H., Cheng, F.T., Man, H.C., (2007) Appl. Surf. Sci., 253, p. 6762
Song, H.-J., Kim, M.-K., Jung, G.-C., Vang, M.-S., Park, Y.-J., (2007) Surf. Coat. Tech., 201, p. 8738
Rosenberger, M.R., Amerio, O., Schvezov, C., (2005) Forth International Congress of Cardiology on the Internet, , http://www.fac.org.ar/ccvc/llave/tl211/tl211.php, CETIFAC-Bioingeniería UNER, Available
Rosenberger, M.R., Amerio, O.N., Schvezov, C.E., (2005) Mecánica Computacional, 24, p. 1943
Sato, N., (1990) Corros. Sci., 31, p. 1
Blackwood, D.J., (2000) Electrochim. Acta, 46, p. 563
Gomez Sanchez, A., (2011), Ph.D. Thesis, Universidad Nacional de General San Martín, Comisiõn Nacional de Energía Atõmica, Instituto de Tecnología "Prof. Jorge A. Sabato"; Orazem, M.E., Tribollet, B., (2008) Electroquemical Impedance Spectroscopy, , John Wiley & Sons, Hoboken, NJ
Alves, V.A., Reis, R.Q., Santos, I.C.B., Souza, D.G., Gonçalves, T.F., Pereira-Da-Silva, M.A., Rossi, A., Da Silva, L.A., (2009) Corros. Sci., 51, p. 2473
Jaeggi, C., Kern, P., Michler, J., Zehnder, T., Siegenthaler, H., (2005) Surf. Coat. Tech., 200, p. 1913
Shibata, T., Zhu, Y.-C., (1995) Corros. Sci., 37, p. 133
Marsh, J., Gorse, D., (1998) Electrochim. Acta, 43, p. 659
Milosev, I., Kosec, T., Strehblow, H.-H., (2008) Electrochim. Acta, 53, p. 3547
González, J.E.G., Mirza-Rosca, J.C., (1999) J. Electroanal. Chem., 471, p. 109
Krupa, D., Baszkiewicz, J., Sobczak, J.W., Bilinski, A., Barcz, A., (2003) J. Mater. Proces. Tech., 143-144, p. 158
Souza, M.E.P., Lima, L., Lima, C.R.P., Zavaglia, C.A.C., Freire, C.M.A., (2009) J. Mater. Sci.: Mater. Med., 20, p. 549
Aziz-Kerrzo, M., Conroy, K.G., Fenelon, A.M., Farrell, S.T., Breslin, C.B., (2001) Biomater., 22, p. 1531
Metikos-Hukovic, M., Tkalcec, E., Kwokal, A., Piljac, J., (2003) Surf. Coat. Tech., 165, p. 40
ISSN:09475117
DOI:10.1002/maco.201407988